4 specifying the finish tab settings, Stapling, Specifying the center staple and fold setting – Konica Minolta bizhub C650 User Manual
Page 144
C650
6-13
Setting up the PostScript driver (Windows)
6
6.4
Specifying the Finish tab settings
Stapling
Multiple-page documents can be stapled.
2
Reminder
The staple function is available only when the optional finisher is installed.
1
Click the Finish tab.
2
Select the "Staple" check box.
3
From the drop-down list, specify the number of staples and the stapling position.
2
Note
Specify the staple position noting the binding position specified in "Binding Position".
Specifying the center staple and fold setting
You can specify to center staple and fold a printed document. By specifying the center staple and fold setting,
printed documents can be folded in half and stapled.
2
Reminder
The center staple and fold function is available only when optional finisher FS-608 is installed.
1
Click the Finish tab.
2
Select the "Center Staple and Fold" check box.
2
Note
The center staple and fold function cannot be specified when the staple, punch, or fold function is
specified.
The center staple function and the thick paper function cannot be specified when finisher FS-608 is
installed.