Specifying the paper tray, Starting up a software tool – Konica Minolta bizhub C650 User Manual
Page 126
C650
5-30
Setting up the PCL driver (Windows)
5
!
Detail
For the procedure for specifying "Encrypt. Passphrase" to be defined by the user, refer to "Specifying
a user-defined encryption passphrase" on page 9-30.
Specifying the paper tray
You can register the paper size, paper orientation, and paper type for the paper that is loaded in a paper tray.
2
Reminder
If the paper loaded in this machine and the paper specified from the printer driver are different, printing
cannot be performed correctly. Be sure to make the proper settings.
1
Click the Configure tab.
2
Click the [Paper Tray Settings] button.
The Paper Tray Settings dialog box appears.
3
Select the desired tray in "Paper Tray Information", and then specify the paper size, paper orientation,
and paper type.
4
Click the [OK] button.
2
Note
The paper type for a paper tray can also be specified from the Basic tab. For details, refer to "Specifying
the Basic tab settings" on page 5-5.
Specify "Duplex Side 2" to print on the back side of a page.
Starting up a software tool
You can start up tools such as PageScope Web Connection that can be used by this machine.
1
Click the Configure tab.
2
From the "Software Tools" drop-down list, select the function.
3
Click the [Start] button.