Selecting the output method, Specifying the user authentication settings, Specifying the account track settings – Konica Minolta bizhub C650 User Manual
Page 139
C650
6-8
Setting up the PostScript driver (Windows)
6
2
Note
The current specified settings can be checked in "Device Status".
Click the [Restore Device Status] button to communicate with this machine and read the status of the
settings specified on this machine. You cannot use this function if you are not connected to or able to
communicate with this machine.
The paper type for a paper tray can also be specified from the Configure tab, and the paper size and
paper orientation can be specified as well. For details, refer to "Specifying the Configure tab settings"
on page 6-30.
Specify "Duplex Side 2" to print on the back side of a page.
Selecting the output method
Not only can you print directly, but you can select "Secure Print", which requires a password to print, or "Save
in User Box", which saves data in the boxes that were created on the HDD.
1
Click the Basic tab.
2
From the "Output Method" drop-down list, select the output method.
–
Print: Prints immediately.
–
Secure Print: Saves the document to be printed in "Secure Print User Box" of this machine. When
printing, you are required to enter the ID and password in this machine’s control panel. Select when
printing highly confidential documents.
–
Save in User Box: Saves the document to be printed in a box on this machine.
–
Save in User Box and Print: Saves the document in a box and prints at the same time.
–
Proof Print: After a part of the document has been printed, this machine stops printing temporarily.
Select to avoid misprinting a large volume of print jobs.
–
ID & Print: Saves the document to be printed in the ID & Print User Box on this machine. When
printing, user authentication must be performed via the control panel of this machine.
!
Detail
For details on Output Method, refer to "Function detail description" on page 9-1.
Specifying the user authentication settings
If the user authentication settings have been specified on this machine, you must enter a user name and
password.
2
Reminder
If a job is printed using a user name or password that is not a registered account on this machine, or if
a job is printed without selecting a user under "User Authentication", the operation is not authenticated
by this machine and the job is canceled.
!
Detail
For details on user authentication, refer to "Printing on a machine with the user authentication set up"
on page 9-17.
Specifying the account track settings
If the account track settings have been specified on this machine, you must enter a department name and
password.
2
Reminder
If a job is printed using a department name or password that is not a registered account on this
machine, or if a job is printed without "Account Track" selected, the operation is not authenticated by
this machine and the job is canceled.