Konica Minolta bizhub C650 - Manual (Page 103)

C650 5-7
Setting up the PCL driver (Windows) 5
Specifying the paper type for a paper tray
You can specify the paper type for a paper tray.
1
Click the Basic tab.
2
Click the [Paper Settings for Each Tray] button.
The Paper Settings for Each Tray dialog box appears.
3
From "Paper Type Settings", select the desired paper tray, and then select the paper type to be
specified from the "Paper Type" drop-down list.
4
Click the [OK] button.
2
Note
The current specified settings can be checked in "Device Status".
Click the [Restore Device Status] button to communicate with this machine and read the status of the
settings specified on this machine. You cannot use this function if you are not connected to or able to
communicate with this machine.
The paper type for a paper tray can also be specified from the Configure tab, and the paper size and
paper orientation can be specified as well. For details, refer to "Specifying the Configure tab settings"
on page 5-29.
Specify "Duplex Side 2" to print on the back side of a page.
Selecting the output method
Not only can you print directly, but you can select "Secure Print", which requires a password to print, or "Save
in User Box", which saves data in the boxes that were created on the HDD.
1
Click the Basic tab.
2
From the "Output Method" drop-down list, select the output method.
– Print: Prints immediately.
– Secure Print: Saves the document to be printed in "Secure Print User Box" of this machine. When
printing, you are required to enter the ID and password in this machine’s control panel. Select when
printing highly confidential documents.
– Save in User Box: Saves the document to be printed in a box on this machine.
– Save in User Box and Print: Saves the document in a box and prints at the same time.
– Proof Print: After a part of the document has been printed, this machine stops printing temporarily.
Select to avoid misprinting a large volume of print jobs.