For macintosh os x, For macintosh os x -18 – Konica Minolta bizhub C650 User Manual
Page 223
C650
9-18
Function detail description
9
–
If performing user authentication on a server, the server settings must be specified. Click the [User
Authentication Server Setting] button to select the server.
–
Click the [Verify] button to communicate with this machine and check whether authentication can
be performed with the user that was entered. This function is not available unless the connection is
enabled for communications with the machine.
–
If user authentication is performed with the Relay Server (PageScope Authentication Manager), the
user information specified by the server administrator must be entered. Screen that appears and
input items vary according to the specification. For details, consult your server administrator.
–
If user authentication is performed with the Relay Server (PageScope Authentication Manager), in
the Administrator Settings of the machine, select [System Connection ]- [Open API Settings] -
[Authentication], and then select "OFF". For details, refer to "Authentication Setting for the OpenAPI
Settings" on page 10-38.
5
Click the [OK] button, and specify the desired settings, and then print the document.
–
If the entered user name is a name registered on the machine, the job is printed and counted as a
job for the specified user.
2
Reminder
If the user authentication settings are not specified on the Configure tab, user authentication cannot be
performed. If using the user authentication function, be sure to specify the settings on the "Device
Option". For details, refer to "Specifying the Configure tab settings" on page 5-29, page 6-30.
For Macintosh OS X
1
In the "File" menu, select "Print".
2
Select "Output Method".