Konica Minolta bizhub C650 - Manual (Page 77)

C650 3-30
Setting up network printing 3
Specifying the Bonjour settings
When connecting this machine to a Macintosh computer using Bonjour/Rendezvous, the Bonjour settings
must be specified.
2
Note
The Bonjour connection is a Mac OS X 10.4 function, it is the same function as the Rendezvous
connection in Mac OS 10.3 or earlier.
1
Press the [Utility/Counter] key in this machine’s control panel, touch [Administrator Settings], and then
enter the administrator password.
– The administrator password is required to enter Administrator mode. Ask the administrator of this
machine for the administrator password.
2
Touch [Network Settings], then [Bonjour Setting].
3
Specify settings for the following. After specifying the settings, touch [OK].
– Bonjour Setting: Select [ON].
– Bonjour Name: Specify the Bonjour name that is to appear as the connected device name (up to 63
characters).
4
To apply the settings, restart this machine (turn the main power off, then on again).
2
Reminder
When turning the power off, then on again, wait at least 10 seconds before turning the power on again;
otherwise, this machine may not function properly.
Setting the Macintosh computer
Use the Macintosh computer that is connected to specify the TCP/IP and AppleTalk settings.
2
Note
For network settings, consult the network administrator.
For the printer driver installation procedure, refer to "Installing the printer driver" on page 2-1.
Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not required to change the settings.
Bonjour/Rendezvous is a Mac OS X function. For Mac OS 9.2, connect using AppleTalk.