Konica Minolta KIP 7000 - Manual (Page 47)

Section 1 Basic Printer Functions 1-41
3. 1 Changing the Density Level
Please Set in the Touchscreen - “?”
If you would like to make the image darker or lighter, you will change the density level on the
scanner or controller.
After specifying the density level on the scanner or controller, it is also possible to compensate the
image density on the printer, if needed.
Image
Density Indicator
Level 4 (Darkest)
Density Selection Key
There are 4 kinds of levels. (The default setting is Level 3).
Levels are changed by pressing the Density Selection Key.
(The image density gets darker by selecting the bigger level number.)
Level 1 Level 2 Level 3 Level 4
darker darker darker
MENU TEST
TONER REMAIN IMAGE DENSITY
job
ENTER
Level 1 (Lightest)