beautypg.com

Konica Minolta KIP 7000 User Manual

Page 233

background image

7-21 Section 7 KIP Print Net

Reprint

Sets the number of copies to reprint after a jam condition. This value is used

as

default.

Sets the number of inches to reprint after a jam condition. If a value is set

here it will override the default copies to reprint.


Advanced Configuration

Print Separator Sheets

Sets where separator sheets are printed.

Deck Info

Sets Media selection. Custom Media Types can be added here.

Other

Min Cut Length – Sets the minimum length a sheet can be cut to, measured

in Inches. Default 8.25”.

Max Image Length – Sets maximum image length that can be printed,

measured in Inches. Default 600”.

HPGL Min Line weight – Sets the minimum line weight for HPGL pens,

measured in Inches. Default .003”.

HPGL Min Grayscale – Sets the minimum setting for grayscale. Default 1.

DWF Min Line weight – Sets the minimum line weight for DWF images.

Default

1.

Image Width Removal – Sets how much with of the image is removed,

measured in pixels. Default 75.

Lead Edge Void – Sets the amount of the leading edge is ignored, measured

in pixels. Default 50.

Delay Between Collated Sets – Sets the print delay in between collated sets,

measured in seconds. Default 1.

Custom Media Types

Lists and sets Media Types.