Konica Minolta KIP 7000 - Manual (Page 196)

Section 6 Request 6-40
5.2 Connection to KIP Printers
Once the application is installed and run for the first time, it is time to connect to a
KIP device. Please ensure that the KIP printer is plugged in and turned on, and the
address IP settings configured (see Section 11 Connectivity).
5.2.3 Find KIP Printers
Using the upper menu, select “Option” and then “Find KIP Printers”.
1) From the FIND KIP PRINTERS window,
click ADD A PRINTER TO THIS LIST.
2) Select SET IP ADDRESS and enter the IP
Address of the KIP IPS.
3) In the “Description” field, key in a friendly
Printer Name that the User can recognize
(model number such as “7000”).
4) TEST the connection.
Note : If the IP address is invalid, the
following message is seen.
5) Click OK to return to the SELECT PRINTERS screen and ensure that the printer
is selected with a check mark.
6) Click OK again to return to Request Screen.
7) The roll information should now be seen in the lower main screen as well to
confirm connection.