Konica Minolta KIP 7000 - Manual (Page 26)

Section 1 Basic Printer Functions 1-20
Pre-printed
Extremely slippery
Extremely sticky
Extremely thin and soft
OHP Film
1. 8. 3 Maintaining the Media
Store the media noting the following:
1. Do not expose the paper to the direct sunlight.
2. Keep the paper away from high humidity. (It must be stored at less than 70%)
3. Put the paper on a flat surface, do not damage the media.
4. If you will store paper that has already been unpacked, put it into a plastic bag to avoid
moisture in the media.
CAUTION
Do not use paper with staples.
Do not use such conductive paper such as aluminium foil and carbon paper.
The above may result in fire or damage to the machine.
NOTE
(1) Print image may become light if printed on the rough surface of the paper.
(2) Print image may be poor if the print paper has excess curl.
(3) Using paper that does not satisfy the specifications may cause paper mis-feeds, poor
print images, or creasing.
(4) Do not use paper with “unique” surfaces, such as thermal paper, art paper, aluminium
foil, carbon paper and conductive paper.
(5) Vellum that is exposed to air over a long period of time tends to cause poor printing. We
recommend you that you remove one round on the surface of the vellum by using the
Initial Cut Key on the User Interface (UI).
(6) Remove all adhesive from the media roll that may remain from tape placed onto the
media by the media supplier.