Konica Minolta KIP 7000 - Manual (Page 280)

4
6. On the next screen you will need to configure the following items:
a. In the first pull down select “IP Printing”
b. In the second “Printer Type” pull down select LPD/LPR
c. In the third area “Printer Address” set this to your KIP printer IP Address
d. In the fourth area “Queue Name” set the queue name to KIP (this is the
default Queue name)
e. In the fifth area “Printer Model” select “Other”
7. Locate the desired .PPD file (ex. KIPGS600.PPD) select “choose”