5 open calibration menu – Konica Minolta KIP 7000 User Manual
Page 113
3-18 Section 3 ?” Screen
5.5 Open
Calibration
Menu
The six modes displayed in this screen
reference the six modes in the “Copy” and
“Scan” screens of the KIP User interface.
a) On the right side of this screen
shows if the mode has been
calibrated.
b) To calibrate a copy / scan mode
select it.
c) An “x” will appear beside the mode
to be calibrated.
d) Select “Print Calibration Target” button and an arrow with multicolored blocks will
start to print from the device.
e) After the target is printed and has time to
dry completely, (from inkjet or bubble jet
process) trim the target with scissors to
8.5 x 11 size (remove any excess media)
and then press the Scan Calibration
Target button
f) Insert the target face up in the center of
the KIP scanner noting the arrow’s
direction.
g) After the scan is completed, the IPS will automatically calibrate the scanner - media
– mode. It will place a “check” beside the calibrated mode, set the date it was
calibrated and allow function of this mode in color Copy and Scan Modes of the KIP
7000.