Konica Minolta bizhub PRESS 2250P - Manual (Page 156)

Adding a barcode
Add a barcode to a mark set, and define the barcode data code in
the Resource Center window.
The IC-312m print controller provides four predefined types of
barcodes:
● Code 39—An alphanumeric barcode of up to 50 characters.
● EAN-8—A numeric barcode of up to eight numbers. Seven
numbers are custom numbers that you select and one number
is determined by the barcode engine.
● Interleaved 2 of 5—A numeric barcode of up to 50 numbers.
● DataMatrix—An alphanumeric barcode of up to 2,000
characters.
1. From the Tools menu, select Resource Center.
2. In the Resource list, make sure that Mark Sets is selected.
3. Select a mark set, and then either click Add Mark Type or
click to select an existing mark.
4. In the Mark Type list, select Barcode Mark.
5. In the Height area, type the height of the barcode that you
want to add.
You cannot change the barcode's width.
6. In the Barcode Type list, select the barcode that you want to
add.
7. Click Edit Variables.
The Edit Barcode Variable window appears.
148 Chapter 10—Setting up your Creo server