Konica Minolta bizhub PRESS 2250P - Manual (Page 109)

Parameter Option Description
but the relationship between the colors does not
change.
RGB source profile Enables you to select an RGB source profile.
RGB rendering intent Provides the following options (for information on
each option, see the descriptions of the CMYK
rendering intent options in this table):
● Auto
● Relative
● Absolute
● Saturation
● Perceptual
Adjustments Brightness Controls the brightness level for the job. The options
range from Lightest, which makes the job 15%
lighter to Darkest, which makes the job 15% darker.
Brightness is generally used to make last-minute
adjustments to the job after proofing. By changing
the Brightness setting, you can control how light or
dark your output appears.
Contrast Controls the difference between the light tones and
the dark tones in your image. The options range
from Less, which makes the job 10% lighter to
More, which makes the job 10% darker. Contrast is
generally used to make last-minute adjustments to
the job after proofing. By adjusting the Contrast
setting, you can control the difference between the
light tones and the dark tones in your image.
Gradation Provides the following predefined option:
● None—The printer applies maximum dry ink
coverage. This is the default setting.
The Gradation parameter also includes a list of the
gradation tables created in the IC-312m print
controller Gradation Tool window. Each gradation
table contains specific settings for brightness and
contrast.
When you select your predefined gradation table,
your job is adjusted according to the specific table's
settings.
Working in IPDS mode 101