Konica Minolta bizhub PRO 2000P User Manual
Page 93
93
Clean the Static Elimination Bars
[48]
Step
Action
Information
1
Clean the static elimination bar
in the connecting bridge.
■
Open the connecting bridge
cover.
■
Clean the pins on the bottom of
the static elimination bar with a
small brush
2
Clean the static elimination
bars in the gathering area.
■
Open the gathering area cover.
■
Clean the pins on the bottom of
the static elimination bars with a
small brush
3
Close the Booklet maker.
■
Close the gathering area cover
■
Close the connecting bridge
cover.
This manual is related to the following products: