beautypg.com

Konica Minolta bizhub PRO 2000P User Manual

Page 15

background image

15

Enter the Job Settings

Procedure for a New Job

[5]

Procedure for a Saved Job

1.

Touch LOAD & SAVE

Step

Action

Information

1

Touch BASIC

2

Enter the paper
size

Touch PAPER SIZE. Enter the dimensions of the
paper.
The job setting is easier if you first select a preset
paper size, then adjust the settings as necessary
Touch PAPER SIZE > PRESETS > A3 or A4. (USA:
11x17, 8.5x11 or 8.5x14)

3

Enter the page
direction

Touch PAGE DIRECTION > LANDSCAPE or
PORTRAIT.
If the PAGE DIRECTION option is not available, the
PAGE DIRECTION cannot be changed.

4

Enter the page
rotation setting

For A4 paper size, the normal setting for ROTATE is
ON. Rotation lets the printer operate at optimum
speed.
Touch ROTATE to turn the sheet rotation ON or OFF.
Always select the page direction before you change
the rotate setting.

5

Enter the set
thickness.

Touch SET THICKNESS. Enter the measured value.

6

Enter the number
of stitches.

Touch STITCHES and enter the number of stitches.
If needed, the stitch pitch can be changed. See
"STITCH PITCH,"

table 9 on page 25

7

Enter the spine
form setting

The spine form setting is automatic, according to the
SET THICKNESS setting. If needed, the setting can
be changed. See "FORM" in

table 9 on page 25

8

Enter the trim
setting.

The trim setting is automatic, according to the PAGE
SIZE and SET THICKNESS settings. To change the
setting, touch TRIM. See “TRIM” in

table 10 on

page 27

9

Touch CLOSE

If needed, save the
job settings to
memory.

If the same job settings are used frequently, then save
the job settings to memory.
See "Save a job."

Load and Save the Job Settings on

page 34

This manual is related to the following products: