Konica Minolta bizhub PRO 2000P - Manual (Page 55)

55
Error Messages
BRIDGE MOTOR
STALL Check for a paper jam in
the connecting bridge.
■ Touch STOP to stop
the Booklet maker.
■ Clear the paper jam.
■ Touch STOP to clear
the message from the
screen.
■
Continue the print job.
( see ‘Clear Paper Jams’
on page 68 )
CHECK THE TRIM BIN The trim bin is either open
or full. Check the trim
bin. Empty the trim bin if
necessary.
COVER OPEN A safety cover is open.
The machine will not
operate until the cover is
closed.
DRIVE MOTOR STALL There is a paper jam.
Check the machine and
correct the error.
Touch STOP to clear the
message from the screen.
Endlay axis moving The endlay axis (size
adjustment) is moving.
This message clears when
the adjustment is
complete.
If the message does not
clear, touch ADVANCED
> RE REF.
ERROR IN TRIM AREA There is an error at the
trimmer.
Check the trimmer for a
paper or book jam.
Touch STOP to clear the
message from the screen.
FLOW ERROR -
BRIDGE There is an error at the
connecting bridge. Open
the connecting bridge
cover and check for a
paper jam. ( see ‘Clear Paper Jams’
on page 68 )
Problem Cause Solution