Clean excess grease from the stitch head – Konica Minolta bizhub PRO 2000P User Manual
Page 101
101
Clean excess grease from the Stitch Head
Clean excess grease from the Stitch Head
Introduction
Follow this procedure if there are grease marks around the stitches on the book.
[58]
Required tool
Lint free cloth
Procedure
[55]
Step
Action
Information
1
On the user interface, touch
ADVANCED > STITCHER
UP > STITCHER UP
The folder cover must be closed.
This action moves the stitch head to
the correct position for lubrication.
2
Open the folder cover.
Open and Close the Folder Cover
on page 37
3
Lift the clincher frame.
Lift and Lower the Clincher Frame
on page 38
4
Clean grease from the sides of
the stitch head.
[59]
5
Lower the clincher frame.
6
Close the folder cover.
This manual is related to the following products: