Enter the job settings – Konica Minolta bizhub PRO 2000P User Manual
Page 14
14
Chapter 2 How to run the Booklet maker
Enter the Job Settings
Enter the Job Settings
Introduction
Enter the settings for a new job in the BASIC window on the touch screen. See the
chapter “The User Interface” for more information.
The PAPER SIZE and PAGE DIRECTION settings are entered on the touch screen.
These dimensions refer to the format of the paper when it enters the Booklet maker.
Attention:
Do not operate the touch screen with a sharp object or with too much
force. These actions can damage the touch screen.
Before You Begin
[4]
Note:
This set can be made into a book (see
Operate the Booklet maker offline on
).
Step
Action
Information
1
Print a set to the
stacker.
2
Measure the sheet
size and the set
thickness.
Measure the set accurately. To make an accurate
book you must enter accurate paper dimensions via
the touch screen.
3
Use these
dimensions for the
job setting.