Konica Minolta bizhub PRO 2000P User Manual
Page 60
60
Chapter 5 Error Conditions, Problems, and Solutions
Error Messages
SHUTTLE MOTOR
ERROR
Use the ON/OFF switch.
Turn the machine OFF,
then turn the machine
ON. If the problem
continues, call your
service engineer.
SHUTTLE NOT
PARKED
The shuttle is in the
wrong position. Touch
START to reset the
position.
Then touch STOP to clear
the message from the
screen.
Sidelay axis moving
The sidelay axis (size
adjustment) is adjusting.
This message clears when
the adjustment is
complete.
If the message does not
clear, touchADVANCED
> RE REF.
STACKER FULL
The stacker is full.
Unload the books from
the stacker.
Stitch axis moving
The stitch axis is moving.
This message clears when
the adjustment is
complete.
If the message does not
clear, touchADVANCED
> RE REF.
Stitch position adjusting
The stitch position is
adjusting. This message
clears when the
adjustment is complete.
If the message does not
clear, touchADVANCED
> RE REF.
Problem
Cause
Solution