Konica Minolta bizhub PRO 2000P - Manual (Page 115)

115
Specifications
Book Thickness Maximum finished book thickness: 10 mm
(approximately 200 pages 80gsm)
Maximum set thickness: 5 mm (approximately 50 sheets
80gsm)
Stitching 1 - 6 stitches, evenly spaced on the spine of the book
Stitches/spool: up to 291,500
Books*/spool: approximately 127,000
Trimming Maximum fore-edge trim: 28 mm
Minimum trimmed book size: 80 mm
[77]
Stacker Capacity 35 books*
Paper Input
Requirements Input sheets must be of consistent size and cut square.
Machine setting must match paper size at the input to the
Booklet maker
Book quality is dependent upon the quality of the input
sheets.
Dimensions Footprint: 1870 x 1675 mm
Height - 1330 mm maximum
Weight Booklet maker including stitching wire: 542kg
As per above, plus bridge and bridge covers: 702kg
Power Supply Adjustable to 200, 208, 220, 230 and 240V
50/60Hz, single phase
Power Consumption stand-by: 92VA (75W)
in operation: 700VA (500W)
Noise Emission stand-by: ambient
in operation: 66 dB (A), peak 87 dB (A)
Approvals Complies with CE and UL. Conforms to FCC rules Part
15 Class A.
* Standard book is made from 20 sheets of 80gsm paper, with 2 stitches.
Production may vary according to operating conditions. In line with a policy of
continual product improvement, the manufacturer reserves the right to alter the
materials or specifications of this product at any time without notice.
max. ±1.1" min. ± 3.2"
† Serial no. 22 onwards