Konica Minolta bizhub PRO 2000P - Manual (Page 46)

46 Chapter 4 Standard Tasks
Adjust the Stacker
[23]
Procedure
[24]
These settings are recommendations. The settings can change with the size,
thickness, and material of book. Make further adjustments if necessary.
A Book size in window
B Collection table
C Orange plastic hand screw
D Catch tray
Step Action Information
1 Set the catch tray angle according
to the thickness of the book. For books that are 1.5 mm thick or
less, use position 1.
For books that are 1.5 mm thick or
less, use position 2.
figure 21 on page 45
2 Set the collection table position
according to the size of the book. Read the settings through the
window.
figure 22 on page 45