Konica Minolta bizhub PRO 2000P - Manual (Page 65)

65
Book Quality
The stitch is not on
the center-line of
the spine The wrong paper size was
entered on the touch screen. Measure the paper and enter
the correct dimensions.
The Booklet maker
adjustment system is not
calibrated correctly. Touch RE-REF in the
ADVANCED window to
calibrate the Booklet maker
adjustment axes. (
see table 11
on page 29 )
The books do not
stack on the
stacker The collection table is in the
wrong position. Adjust the position of the
collection table to fit the size
of the finished book.
Adjust
the Stacker on page 45
The book cover is
dirty or marked The former roller is dirty. Clean the former roller ( see
‘Clean the Former Roller’ on
page 94
).
[23]
Marks on the spine
The former clamp is dirty. Clean the Polyurethane Strips
in the Form Clamp on page 96
[24]
Marks beside the spine
Book Quality
Problem Cause Solution