Konica Minolta bizhub PRO 2000P User Manual
Page 67
67
Book Quality
[28]
Incorrect - The spine needs more form.
Check these settings:
The SET THICKNESS
setting is incorrect
Measure the set thickness
and enter the correct
dimension.
The folder cover is not
securely closed?
Close the folder
cover.
The FORM function is
not turned on?
Turn on the FORM
function. See "FORM" in
The THRESHOLD
value is less than the SET
THICKNESS?
Decrease the
THRESHOLD value.
See THRESHOLD
Does the spine need more
form at one end?
Change NUMBER to 2
or 4. See "FORM" in
Does the spine need more
form at each end?
Increase PRESSURE.
Then, if the spine still
needs more form,
increase NUMBER. See
"FORM" in
[29]
Incorrect - The spine is damaged or there are
creases near the spine.
Check these settings:
The SET THICKNESS
setting is incorrect?
Measure the set thickness
and enter the correct
dimension.
The spine of the book
needs less forming.
Decrease PRESSURE.
Then, if the spine is still
over formed, decrease
NUMBER. See "FORM"
in
Spine Form
Condition