Load and save the job settings, Load and save the job settings on – Konica Minolta bizhub PRO 2000P User Manual
Page 34
34
Chapter 4 Standard Tasks
Load and Save the Job Settings
Load and Save the Job Settings
Introduction
The current job settings can be saved to memory and reloaded for use again at a later
date. Load the 'Default Job Template' to reset the Booklet maker to normal settings.
Save a job
1.
Touch LOAD & SAVE
> SAVE.
2.
If these options appear, select one.
■
REPLACE to over-write the previous job with the current job settings.
■
SAVE NEW to save the current job with a new name.
■
CANCEL to cancel the job save.
3.
Enter the name for the job on the keyboard
4.
Touch OK or CLOSE.
Load a job
1.
Touch LOAD & SAVE .
2.
Touch the job name or use the Up arrow or the Down arrow to select the job.
3.
Touch LOAD.
4.
Wait until the Booklet maker has made the adjustments.
Reset the Booklet maker to default settings
1.
Touch LOAD & SAVE .
2.
Select the Default Job Template from the list of jobs.
3.
Touch LOAD.
4.
Touch YES.