Konica Minolta bizhub PRO 2000P - Manual (Page 81)

81
Clear a Stitch Head Jam
Procedure 1
[41]
Procedure 2
[42]
Step Action Information
1 Stop the Booklet maker. Touch the STOP button
2 Open the folder cover. Open and Close the Folder Cover
on page 37
3 Lift the clincher frame. Lift and Lower the Clincher Frame
on page 38
.
4 Remove the jammed paper.
5 Check for broken or damaged
stitches in the clincher area.
Manually operate the clincher
to clear any stitches that are
jammed. [41]
Press to manually operate the
clincher.
6 Lower the clincher frame. Lift and Lower the Clincher Frame
on page 38
7 Close the folder cover.
8 If there is paper in the
gathering area, touch START,
then touchADVANCED >
PURGE SET > MAKE
BOOK. This action clears paper from the
BLM 500 / Bookletmaker 50and
resets the stitch head.
9 Continue the print job.
A
[42]
[42] Remove the stitch head wire holder
A Stitch head
A
B
C