Konica Minolta bizhub PRO 2000P - Manual (Page 108)

108 Chapter 6 Maintenance
Install New Stitch Wire
[62]
Remove the Stitch Wire from the Stitch Head
[63]
Fit a New Stitch Wire Spool
[64]
A Stitch Wire Guide Block
B Stitch wire
C Felt wire-cleaning pads
Step Action Information
1 Cut the stitch wire to the right
of the stitch wire guide block. [68]
Detail A: Cut here
2 Pull the stitch wire from the
stitch wire guide block.
3 Fit a new stitch wire spool. ( see ‘Fit a New Stitch Wire Spool’ )
A
Step Action Information
1 Open the stitch wire cabinet
2 Remove the stitch wire cap
and finished stitch wire spool.
3 Fit a new stitch wire spool.
4 Fit the stitch wire cap [69]
5 Loosen the end of the stitch
wire from the edge of the
stitch wire spool.