Konica Minolta bizhub PRO 2000P - Manual (Page 61)

61
Error Messages
STITCH TIMEOUT There is an error at the
stitcher.
If the problem continues,
call your service engineer. Stitch Timeout Error on
page 75
TOO MANY PAGES The printer has delivered
more than 55 sheets into
the gathering area.
Remove the incorrect set.
Correct the printer
setting.
Touch STOP to clear the
message from the screen. ( see ‘Open the Gathering
Area Cover’ on page 40 )
TOUCH PAD ERROR There is a fault with the
START and STOP touch
pads. If the problem
continues, call your
service engineer.
Touch START to clear
machine There may be some paper
in the machine. Touch
START to clear the
machine before you start
a new job.
Trim axis moving The trim axis (size
adjustment) is moving.
This message clears when
the adjustment is
complete.
If the message does not
clear, touchADVANCED
> RE REF.
TRIM BIN OPEN The trim bin is not
installed or is not in
contact with the safety
switch. Install the trim
bin.
Problem Cause Solution