The touch screen – Konica Minolta bizhub PRO 2000P User Manual
Page 20
20
Chapter 3 The User Interface
The Touch Screen
The Touch Screen
Introduction
[4]
[4] The User Interface
[6]
The user interface includes a color touch screen and START/STOP buttons.
Operate the touch screen with your fingertip. You can touch the screen with a blunt
item, for example a palm-top 'wand' or the blunt end of a pen. Do not use too much
force. A light touch is all that is needed.
Power save
The touch screen has a power-save function. After several minutes without use, the
brightness of the touch screen decreases. After several hours, the touch screen turns
off. Touch the screen to restore the normal brightness. The touch screen takes two or
three minutes to reach full brightness.
If you hear a 'beep' when you operate the touch screen, the selected function is not
available. Some functions are not available when the machine is in operation.
Some functions and buttons are only available at certain access levels. See "ACCESS
LEVEL"
.
Attention:
Do not operate the touch screen with a sharp object or with too much
force. These actions can damage the touch screen.
A
B
C
A
START Button
B
STOP Button
C
Touch Screen