See ‘ spine form problems – Konica Minolta bizhub PRO 2000P User Manual
Page 66
66
Chapter 5 Error Conditions, Problems, and Solutions
Book Quality
Spine Form Problems
To make the square spine of the book, pressure is applied to the spine. This process
is called forming. The Booklet maker automatically applies the optimum amount of
form according to the book thickness.
Some types of paper may need further adjustment.
[28]
The book cover is
dirty or marked
The trimmings-removal
fingers are dirty.
Clean the Trimmings Removal
Fingers on page 98
[25]
Curved marks on the book
There are grease marks
around the stitches.
Clean excess grease from the
Stitch Head on page 101
[26]
Grease marks near the stitches
Book Quality
Problem
Cause
Solution
Spine Form
Condition
[27]
Correct
The spine is square at each end and the paper is not
damaged.
The Booklet maker setting is correct. Adjustment is
not needed.