Konica Minolta bizhub PRO 2000P - Manual (Page 103)

103
Lubricate the Stitch Head
[56]
[62]
[62] Driver Bar
[57]
Required tools
Klüber Isoflex NBU15 Grease, 50g
Air duster - is supplied with the machine
Attention: - Only use the grease shown in this manual. Correct lubrication
extends the performance and service life of the stitch head. Other types of grease
do not protect the stitch head
- Only apply the grease as shown. If you apply additional grease, the paper gets
marked.
A Stitch Head
B Wire Holder
C Wire Holder Retaining Spring
A
B
A Driver, in upper position
B Driver Bar