Lubricate the wire-feed cam – Konica Minolta bizhub PRO 2000P User Manual
Page 106
106
Chapter 6 Maintenance
Lubricate the Wire-feed Cam
Lubricate the Wire-feed Cam
Introduction
[65]
[65] Lubricate the wire-feed cam
[60]
Lubricate the wire-feed cam
[61]
A
B
C
A
Nozzle for the tube of grease
B
Wire-feed cam
C
Feed lever
Step
Action
Information
1.
Lift the PSQ main deck.
2.
Apply 10 mm of grease from
the tube between the bearing
surface of the wire-feed cam
and the feed lever.
[66]
3.
Lower the Booklet maker main
deck
4.
Lower the clincher frame.
Lower the Clincher Frame on
page 39
5.
Close all of the covers
0.4"
This manual is related to the following products: