Allied Telesis AT-S65 User Manual
Page 71
AT-S65 Management Software User’s Guide
71
The Module Status Menu provides the following information:
Name
The name can be up to 20 alphanumeric characters including spaces
and special characters. You may want to choose a name that reflects
the organization or group that is connected through this line card.
Port/Link
Indicates whether there is an active connection between the SFP port
and the device connected to it, which is one of the following:
Tx - The status of the transmit port, which can be one of the following:
Offline: The SFP transmitter is disabled.
Online: The SFP transmitter is enabled.
Rx - The status of the receive port, which can be one of the following:
Offline: The SFP input power is less than the threshold value for Rx
loss specified by the vendor.
Online: The SFP input power is higher than or equal to the threshold
value for Rx loss specified by the vendor.
Wavelength
The wavelength of the line transmitter’s laser.
Temperature
The current temperature of the line card.
Current Data Rate
The current data rate of the line card ± 10%.
Module Location
For information about setting up this information, refer to “Changing
the Line Card Name and Location” on page 74.
Module Information
For information about displaying this detailed information, go to step 3.
Vendor Information
For information about displaying this information, refer to “Displaying
SFP Vendor Information” on page 73.
Module Status
The status of the line card. The options are:
Enabled - Enables the lasers on the port (SFP) and WDM (line) sides.
This is the default.
Disabled - Disables the lasers on the port and WDM sides but does not
terminate traffic.