Allied Telesis AT-S65 - Manual (Page 37)

AT-S65 Management Software User’s Guide
37
Pinging a Remote System
You can instruct the chassis to ping a remote device on your network. This
procedure is useful in determining whether a valid link exists between the
chassis and another device. The chassis sends an Internet Control
Message Protocol (ICMP) echo request to the end node. If the node is
operating and receives the request, it sends a reply to the chassis.
Note
You can only ping a remote device when you are connected
remotely.
To instruct the chassis to ping a network device, perform the following
procedure:
1. From the Main Menu, select Administration.
The Administration Menu is shown in Figure 13.
Figure 13. Administration Menu
Administration Menu
Xmodem Software Update to this System
Image Download Through TFTP
Ping a Remote System
Syslog Server Address: Null (not configured)
Syslog Facility Code: 1
Event Log
Activity Monitor
> Start Log
Stop Log
Outstanding Errors
Diagnostics
Reset and Restart the System
Reset Database to Default
Return to Main Menu ...