Allied Telesis AT-S65 - Manual (Page 70)

Chapter 5: Working With Line Cards
70
Displaying Detailed Line Card Information
The AT-S65 management software provides detailed information about
the line cards including items such as temperature, data rate, wavelength,
and vendor information for the SFP. The procedures in this section
include:
ˆ “Displaying Line Card Status Information,” next
ˆ “Changing the Line Card Name and Location” on page 74
ˆ “Enabling or Disabling a Line Card” on page 74
ˆ “Displaying SFP Vendor Information” on page 73
Displaying Line
Card Status
Information
To display detailed line card status information, perform the following
procedure:
1. From the Main Menu, select Module Status and Configuration.
The Module Status and Configuration Menu is shown in Figure 24 on
page 52.
2. Select the line card whose information you want to display and press
Enter.
An example of the Module Status Menu for an AT-LX3811/1 line card
is shown in Figure 31.
Figure 31. Sample Line Card Information
1: AT-LX3811/1
Module Name:
Port Link
Tx Offline
Rx Offline
Wavelength 1470
Temperature 41.8 Celsius
Current Data Rate 0.0 Mbps
Module Location:
Module Information
Vendor Information
Module Status
Enabled
Port Status Enabled
Line Card Mode of Operation
Return to Line Card Status and Configuration Menu ...