Allied Telesis AT-S65 - Manual (Page 41)

AT-S65 Management Software User’s Guide
41
The Terminal Data Rate menu is shown in Figure 18.
Figure 18. Terminal Data Rate Menu
4. Select the baud rate you want and press Enter.
The default is 115200. To avoid connection problems, always set the
terminal data rate and the baud rate in your terminal emulation
program to the same setting.
5. Return to the Main Menu.
Changes to the baud rate take effect the next time you start a local
management session.
Terminal Data Rate Menu
> 115200 bps
19200 bps
9600 bps
4800 bps
2400 bps
Return to Terminal Configuration Menu ...