Allied Telesis AT-S65 - Manual (Page 15)

AT-S65 Management Software User’s Guide
15
ˆ Parity: None
ˆ Stop bits: 1
ˆ Flow control: None
Note
These settings are for a DEC VT100 or ANSI terminal, or an
equivalent terminal emulation program.
The software initializes.
4. Press Return.
The Login prompt is displayed.
5. To configure chassis settings, enter “manager” as the user name. To
only view the settings, enter “operator” as the user name.
The Password prompt is displayed.
6. To configure chassis settings, enter “friend” as the password for a
manager login. To only view the settings, enter “operator” as the
password for an operator login.
The Main Menu is displayed, as shown in Figure 2.
Figure 2. AT-S65 Main Menu
Refer to “Using the Menus Interface” on page 19 for information about how
to move through the menus and make menu selections.
Quitting a Local
Management
Session
To end a local management session, return to the Main Menu and select
Quit.
Allied Telesyn AT-LX3800U
Main Menu
Module Status and Configuration
Administration
System Configuration
Quit