Allied Telesis AT-S65 - Manual (Page 57)

AT-S65 Management Software User’s Guide
57
Using the Event Log
The event log provides vital information about chassis activity that helps
you identify and solve system problems. The event log permanently stores
system event information in a file saved in flash memory on the system.
The file can contain up to 511 events. When the maximum number of
events is reached, new events are added to the beginning of the file and
old ones are deleted.
In contrast, the activity log as described in “Using the System Activity
Monitor” on page 54 contains only those events that occurred since you
started the latest management session.
Displaying the
Event Log
To display the event log, perform the following procedure:
1. From the Main Menu, select Administration.
The Administration menu is shown in Figure 13 on page 37.
2. From the Administration menu, select Event Log and press Enter.
The Event Log menu is shown in Figure 26.
Figure 26. Event Log Menu
3. From the Event Log menu, select Display Event Log and press Enter.
Event Log Menu
Display Event Log
Clear Event Log
Return to Administration Menu ...