Allied Telesis AT-S65 - Manual (Page 23)

AT-S65 Management Software User’s Guide
23
3. Type a name for the system and press Enter.
4. Select IP Parameters and press Enter.
The IP Parameters Menu is shown in Figure 5.
Figure 5. IP Parameters Menu
5. Adjust the following parameters as necessary:
Location
The physical location of the system, for example, Third Floor Network
Operations. The location can be up to 20 alphanumeric characters,
including spaces and special characters. To delete a location without
entering a new name, press the space bar.
Contact
The name, phone number, and other information that identifies the
person responsible for managing the system.The contact information
can be up to 20 alphanumeric characters, including spaces and special
characters. To delete the contact information without entering a new
name, press the space bar.
IP Parameters Menu
IP Address: Null (not configured)
Subnet Mask: 255.255.0.0
Gateway Address: Null (not configured)
Manager Address1: Null (not configured)
Manager Address2: Null (not configured)
Manager Address3: Null (not configured)
Manager Address4: Null (not configured)
Get Community String: public
Set Community String: private
Trap Community String: public
Location:
Null (not configured)
Contact: Null (not configured)
> Disable DHCP
Enable DHCP
Return to System Configuration Menu ...