Allied Telesis AT-S65 - Manual (Page 48)

Chapter 3: Menus Interface Security
48
Enabling or Disabling Access Methods
As explained in Chapter 1, you can access the AT-LX3800U system
locally through the RS-232 terminal port or remotely using the Telnet
application. You can disable either method to enhance security by
preventing unauthorized individuals from making changes to the system’s
configuration settings.
To enable or disable an access method, perform the following procedure:
1. From the Main Menu, choose System Configuration.
The System Configuration menu is shown in Figure 22 on page 46.
2. From the System Configuration menu, select Omega Options and
press Enter.
The Omega Options menu is shown in Figure 23 on page 47.
3. To enable or disable local access, select Local Omega Enabled or
Disable Local Omega.
These options control local access to the AT-S65 management
software on the AT-LX3800U system. The default is enabled.
4. To enable or disable remote access, select Remote Omega Enabled
or No Remote Omega.
These options control remote access to the AT-S65 management
software on the AT-LX3800U system. The default is enabled.
5. Return to the Main Menu.