Allied Telesis AT-S105 - Manual (Page 39)

AT-S105 Management Software Web Browser User’s Guide
39
subnet mask or “Enabling and Disabling the DHCP Client” on page 28
to activate the DHCP client.
Default Gateway
Default gateway’s IP address. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 24 to manually assign a
gateway address or “Enabling and Disabling the DHCP Client” on
page 28 to activate the DHCP client.
Automatic Network Features Section:
DHCP Mode
The status of the DHCP client on the switch. For information about
setting this parameter, refer to “Enabling and Disabling the DHCP
Client” on page 28.