Allied Telesis AT-S105 - Manual (Page 107)

AT-S105 Management Software Web Browser User’s Guide
107
Deleting an SNMP Community
Use the following procedure to delete an existing SNMP community in the
Community Table.
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select Community Table.
The Community Table page is shown in Figure 33 on page 105.
3. To delete a community, select delete in the Community Table next to
the community that you want to remove.
The Community Table Page is updated.
4. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.