Allied Telesis AT-S105 - Manual (Page 202)

Chapter 19: Management Software Updates
202
2. From the Firmware Upgrade folder, select via TFTP.
The Firmware Upgrade via TFTP page is displayed. See Figure 63.
Figure 63. Firmware Upgrade via TFTP Page
The Image/Version Date shows the current version and date of
software installed on the switch.
3. Change the following parameters as necessary:
TFTP Server IP
The IP address of the TFTP server from which you are downloading
the new software.
Image File Name
The name of the AT-S105 file you are downloading.
Retry Count:
The number of times the firmware upgrade is retried. The default
number of tries is 5. The range is 1 through 20.
4. Click Apply.
The software immediately begins to download onto the switch. This
process takes a few minutes. After the software download is complete,
the switch initializes the software and reboots. You will lose your web
browser connection to the switch during the reboot process.