Allied Telesis AT-S105 - Manual (Page 123)

AT-S105 Management Software Web Browser User’s Guide
123
Ingress Rate
Limiting
The Ingress Rate Limiting feature restricts the traffic to a pre-configured
data rate that can flow into a port. This data rate limit can be configured in
64 Kbps increments within a range from 64 Kbps to 100 Mbps for the 10/
100Base-T ports and 64 Kbps to 1 Gbps for the 1 GB combo ports. The
formula for calculating the bandwidth limit is as follows:
Bandwidth = 64Kbps x rate limit
For the AT-FS750/24POE, the rate limit parameter is an integer
ranging from 1 to 1562 for ports 1 - 24 and 1 to 15625 for ports 25 and
26.
For the AT-FS750/48, the rate limit parameter is an integer ranging
from 1 to 1562 ports 1 - 48 and 1 to 15625 for ports 49 and 50.
Egress Rate
Limiting
The Egress Rate Limiting feature restricts the traffic to a pre-configured
data rate that can flow out of a port. This data rate limit can be configured
in 64 Kbps increments within a range from 64 Kbps to 100 Mbps for the
10/100Base-T ports and 1850 Kbps to .999 Gbps for the 1 GB combo
ports. The formula for calculating the bandwidth limit for the 10/100Base-T
ports is as follows:
Bandwidth = 64Kbps x rate limit
The rate limit parameter is an integer ranging from 1 to 1562 for
ports 1 - 24 (AT-FS750/24POE switch) or ports 1 - 48 (AT-FS750/48
switch).
The formula for calculating the bandwidth limit for the 1 GB combo ports is
as follows:
Bandwidth = 1850Kbps x rate limit
The rate limit parameter is an integer ranging from 1 to 540 for
ports 25 and 26 (AT-FS750/24POE switch) or ports 1 - 48
(AT-FS750/48 switch).