Allied Telesis AT-S105 - Manual (Page 32)

Chapter 2: Basic Switch Parameters
32
Note
Allied Telesis recommends that you assign a name to the switch. A
name can help you identify the switch when you manage it and can
also help you avoid performing a configuration procedure on the
wrong switch.
System Location
Specifies the location of the switch. The location is optional and may
contain up to 50 characters.
System Contact
Specifies the name of the network administrator responsible for
managing the switch. This contact name is optional and may contain
up to 50 characters.
4. Click Apply.
5. From the main menu on the left side of the page, select Save
Configuration to Flash to permanently save your changes.