Allied Telesis AT-S105 - Manual (Page 38)

Chapter 2: Basic Switch Parameters
38
The Switch Information Page displays the following information:
System Up For
The number of days, hours, and minutes that the switch has been
running since it was last rebooted.
Runtime Image
The version number and build date of the runtime firmware.
Boot Loader
The version number and build date of the bootloader firmware.
Hardware Information Section:
Version
The hardware version number.
DRAM Size
The size of the DRAM, in megabytes.
Flash Size
The size of the flash memory, in megabytes.
Administration Information Section:
Switch Name
The name assigned to the switch. To give the switch a name, refer to
“Configuring System Management Information” on page 31.
Switch Location
The location of the switch. To specify the location, refer to “Configuring
System Management Information” on page 31.
Switch Contact
The contact person responsible for managing the switch. To specify
the name of a contact, refer to “Configuring System Management
Information” on page 31.
System MAC Address, IP Address, Subnet Mask, and Gateway
Section:
MAC Address
The MAC address of the switch. You cannot change this value.
IP Address
The IP address of the switch. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 24 to manually assign
an IP address or “Enabling and Disabling the DHCP Client” on
page 28 to activate the DHCP client.
Subnet Mask
The subnet mask for the switch. Refer to “Configuring an IP Address,
Subnet Mask and Gateway Address” on page 24 to manually assign a