Allied Telesis AT-GS950/24 - Manual (Page 86)

Chapter 4: STP and RSTP
86
Auto - Automatically determines whether or not the port is
connected to a network device in the network topology. By
default, Auto is enabled.
ForceTrue - The port is connected to a network device in the
network topology.
ForceFalse - The port is not connected to a network device in
the network topology.
Restricted Role - Applies only to MSTP. For information on
MSTP, refer to Chapter 5, “Multiple Spanning Tree Protocol” on
page 87.
Restricted TCN - Applies only to MSTP. For information on MSTP,
refer to Chapter 5, “Multiple Spanning Tree Protocol” on page 87.
Migrate - Clicking the Restart button under the Migrate field in the
All row restarts the protocol migration process for all ports on the
switch. Clicking the Restart button under the Migrate field for a
specific port restarts the protocol migration process for that port
only.
4. Click Apply for the port you are configuring.
5. To configure all of the ports to the same settings, in the All row,
configure any or all settings.
6. Click Apply.
7. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.