Allied Telesis AT-GS950/24 - Manual (Page 37)

AT-GS950/24 Web Interface User Guide
37
Figure 9. IPv6 Neighbor Settings Page with Addresses
6. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Delete an IPv6
Neighbor Entry
To delete an IPv6 neighbor entry or multiple entries, perform the following
procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.
2. From the System folder, select IPv6 Neighbor Settings.
The IPv6 System Settings Page is displayed. See Figure 9 on page 37.
3. Select Delete next to the IPv6 neighbor entry that you want to remove.
The IP address is removed from the list.
You can also delete multiple entries by using the top row of the table:
To delete all entries, select All from the drop-down menu under
State, then click the Delete button under Action.
To delete all static entries, select Static from the drop-down menu
under State, then click the Delete button under Action.
To delete all dynamic entries, select Dynamic from the drop-down
menu under State, then click the Delete button under Action.
4. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Find an IPv6
Neighbor
To find an IPv6 neighbor or multiple neighbors, perform the following
procedure:
1. From the main menu on the left side of the page, click the System
folder.
The System folder expands.