beautypg.com

Enable led eco mode – Allied Telesis AT-GS950/24 User Manual

Page 348

background image

Chapter 27: LED ECO Mode

348

Enable LED ECO Mode

To enable LED ECO Mode, perform the following procedure:

1. From the main menu on the left side of the page, select the Tools

folder.
The Tools folder expands.

2. From the Tools folder, select LED ECO Mode.

The LED ECO Mode page is displayed. See Figure 143.

Figure 143. LED ECO Mode Page

3. Select Enabled from the LED ECO Mode pull-down menu.

4. Click Apply.

The port LEDs turn off, and the LED Status changes to OFF. See
Figure 144.

Figure 144. LED ECO Mode Enabled

5. From the main menu on the left side of the page, select Save Settings

to Flash to permanently save your changes.

See also other documents in the category Allied Telesis Computer hardware: