Allied Telesis AT-GS950/24 - Manual (Page 187)

AT-GS950/24 Web Interface User Guide
187
General Configuration
Perform the following procedure to enable or disable GVRP:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select GVRP.
The GVRP folder expands.
3. From the GVRP folder, select GVRP Global Settings.
The GVRP Global Settings Page is displayed. See Figure 68.
Figure 68. GVRP Global Settings Page
4. From the GVRP Status field, select one of the following choices from
the pull-down menu:
Enabled - The GVRP feature is active.
Disabled - The GVRP feature is inactive.
5. Click Apply.
The GVRP setting that you have selected is now active.
6. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.